Tools/Maintenance

RockShox Glass Fiber Reinforced Nylon Non-Scratch O-Ring Pick Tools (Qty 5, for use on suspension products)

This kit contains all the parts needed for scheduled maintenance and/or rebuild of A2 Stealth Reverb Seatposts. - Includes new, upgraded IFP - Requires RockShox Specialty Tools to perform Service: Oil Height Tool, IFP Height Tool

Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

RockShox 30mm Seal Kit

RockShox Volume Reducer Kits

Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post

- SID XX/RL B1 1 year service kit - Includes dust seals, foam rings, o-ring seals, damper sealhead

50 Hour Service Kit (Includes Air Can Seals, Piston Seal, Glide Rings) - Sidluxe A1 (2020)

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon RL/TK A1 (2018+)

This is RockShox's recommended cleaner for suspension internals. Handy aerosol spray degreases and conditions small parts like O-rings and seals. - Formulated with special conditioners that will not cause O-rings and seals to dry, crack, or degrade - For use on all suspension products

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

Works with the following forks: - Pike - Lyrik - SID - Revelation - Reba - Paragon This tool can also be used to remove and install SRAM/Shimano cassettes.

- Essential mechanic tools to properly service and maintain all RockShox products - Clamps the shock body for easy maintenance

Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only

Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding

- Premium red formula all-purpose bicycle grease

- Tool for removal and installation of bottom bracket cups on Cinch cranks

Torx Tool T20 (includes 200mm T20 driver bit with t-handle and qty 8 M4 Torx Spider Mounting bolts). - Extended T20 driver and combination handle - Easily install and remove power meters spiders on cranks that use the 8-bolt interface - The extended T20 driver works with GXP and BB30 cranks - Combination T-handle and screwdriver

ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. Features & Benefits: - Automated tuning recommendations - Shock tuning score - a snapshot of how well your suspension is set up for you - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months - Waterproof and dustproof - IP67 rating - Two alternative hoses (included) offer a range of fitting options - Smartphone app is compatible with Apple and Android phones Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.

ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. Lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. The Direct Mount version is for inverted forks such as the RockShox RS-1. Features & Benefits: - Automated tuning recommendations. - Shock tuning score - a snapshot of how well your suspension is set up for you. - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months. - Waterproof and dustproof - IP67 rating. - Two alternative hoses (included) offer a range of fitting options. - Smartphone app is compatible with Apple and Android phones. Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, adapter for conventional forks and rear shocks, rubber mounting boot and zip ties.

• High quality precision tool; A must for the serious dealer / cyclist! • Adjustability from 3 to 15 Nm; for all stems / handlebars / seatposts etc • Incl. M3, M4, M5, M6, T25 & T30 Chrome Vanadium sockets and extension • Small and easy to use incl. storage-box

Two tools in one. The red handle is a standard reversible ratchet. The black knob is a beam torque wrench. A complete pocket multi-tool! Grab the red handle and tighten or loosen screws and bolts all over your bike. The Patented reversible thumb-wheel ratchet head is rated to up-to 60Nm of total force, so this tool can even be used to install and remove Pedals. Tighten each bolt to exact torque! This is a highly accurate beam torque wrench capable of tightening from 2Nm to 10Nm. When tightening, finish by pushing on the end-knob. As you tighten, the indicator will point to the current torque. When it reaches the correct torque, stop tightening. You're done! 3X larger readout scale. Our new angled slot window offers identical simplicity and accuracy as our standard tool, but 300% the size of our Standard display makes it easier to see and use. Wallet case offers ultimate portability. Our Wallet is much more than a tool case. A thin, durable Velcro closure case with a pocket to fit ID, Credit Card or Cash fits nicely in a jersey pocket or use the slim belt-loop. Semi rigid wallet surfaces insure comfort. Pockets securely hold bits and tools. A high quality, durable tool. Prestacycle TorqRatchet is compatible with all tool bit sets from Prestacycle and all standard ¼" bits. The patented Ratchet head firmly holds bits in place without a magnet. Releasing the bit is simple with a finger-press into the hole on the top. The ratchet offers an easy to use thumb wheel to speed screw installation and removal. The ratchet reverse knob is easily accessible right on top of the tool. The Patent pending Beam torque wrench hidden and protected inside the handle uses hardened alloyed steel and is rated in excess of 5000 cycles and can be re-calibrated by Prestacycle. Specifications: - 3X Larger readout than our standard tool. - Carry-along pocket Ratchet with 1/4" bits set - 2~10Nm Torque Wrench all in the same tool! - Remove and install all kinds of Bolts and Screws on your Bike. - Finish tightening by pushing the Torque Knob until the arrow reaches your torque - Patented Reversible Ratchet with thumb wheel - Heavy-duty design withstands up to 60Nm of force - Uses standard 1/4" Hex bits of all sizes - Calibrated accurate for over 5000 cycles of Torque tightening - Dimensions 5.25" x 11/16" x 7/16" (133mm x 17mm x 12mm) - Tool weight is only 68 Grams! - Wallet case - Securely hold TorqRatchet and 12 bits - Semi-rigid sides insure comfort in your pocket or Jersey - Pocket fits ID, Credit Card or Cash, and more - Slim design fits where you need it - Slim belt loop - Secure Velcro closure - 12 piece Professional Bicycle Tool Bits set - Precision tools in 12 unique sizes specific for bicycles - S2 Nickel-plated Hardened steel bits are non-marring on titanium and alloy bolts Sizes: Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm TORX®: T10, T20,T25, T30 Screwdrivers: PH1

- 100% Natural and biodegradable, Without animal products - Apply a small amount, Work in, Then rinse off with water - Leaves skin clean with a subtle forest scent

- Made from heat-treated tool steel to ensure the ultimate in strength and lasting performance. - Ergonomic, cushioned grip, and high leverage design for comfort and ease of use. - Quickly and cleanly cuts brake and derailleur cables, housing, and other wires. Cable cutters are an essential tool used for some of the most fundamental elements on the bicycle. What seems like a simple tool can often be the root of frustration when poor cut quality ruins a brand new cable, crimps housing shut, or leaves strands uncut. The Pedro's Cable Cutter is an industry favorite and when put to the test against the competition and you will quickly see why. Our cable cutter is designed for years of service, for comfortable and easy usage, and with extra jaw overlap ensuring a clean cut every time. The Cable Cutter is designed for cutting steel cables (wire rope) up to 4mm in diameter. Backed by Pedro's lifetime warranty.

Sometimes the task at hand requires more hands than available. If you've ever worked with some of the more finicky bicycle brakes, you know what we are talking about. Pedro's Cable Puller (commonly known as the "Fourth Hand Tool") provides the perfect tool for tensioning brake or derailleur cables while making adjustments. Featuring one hand operation, ergonomic cushioned handles, and a thumb lock, this tool simultaneously grips and tensions the cable while keeping your other hand free to secure the cable in place. End the frustration and pick one up! Made from heat-treated laser-cut steel.

Professional quality heat-treated steel with hand-saving no-slip plastic grip and ergonomic design for maximum leverage and comfort. - Precision cut for an exact fit with no slippage - Lifetime warranty on all Pedro's tools

This professional quality adjusting cap tool is used to install and remove adjusting caps of Shimano Hollowtech II crank/bottom bracket systems. The unique, dual-density, screwdriver handle provides improved ergonomics and comfort while assisting in control of torque applied to the cap. The precision laser-cut tool bit is made from heat-treated tool steel for strength and durability. - Ergonomic dual-density screw driver handle for comfort and torque control - Tool bit is precision laser-cut, heat-treated, tool steel for strength and durability

If you are looking for the absolutely strongest, most bad-ass tire lever, perfect for the toughest downhill and freeride tires, you've come to the right place. Pedro's downhill tire lever features heat-treated tool steel construction for unmatched strength and reliability, 275mm (10.8") length for incredible leverage, a large shovel tip that holds tight on the bead, a smooth curved shape with polished finished to protect tires and rims, and an ergonomic dual density screw driver style handle providing comfort and security. - Heat-treated tool steel construction for unmatched strength - 275mm length for incredible leverage on tough downhill and freeride tires - Large shovel tip holds tight on bead while smooth finish protects tire and rim - Ergonomic handle provides comfort and security

Socket Tool for Four-Notch BMX/Single-Speed Freewheels - Made from heat-treated tool steel for the ultimate in strength and lasting performance. - Professional quality, precision sized for the perfect fit. - Fits all four-notch BMX/single-speed freewheels for hubs with 1.37 x 24 TPI threads. - Designed to work with Pedro's snap-channel Pro Socket Handle, a 24mm socket or wrench, or in a bench vise. Pedro's socket tools provide a professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly, protecting the component and ensuring simple and safe usage for the mechanic. The Freewheel Socket is designed to fit over axles up to 14mm and work seamlessly with Pedro's snap-channel Pro Socket handle, any 24mm socket/wrench, or in a bench vise. Backed by Pedro's lifetime warranty.

- Fits Shimano, Sun Race, Sachs, and other 12 spline, 22.7mm diameter 5–10 speed freewheels and all Campagnolo cassette lockrings and Record, Chorus, Centaur, and Athena bottom brackets. - Professional quality and precision sized for the perfect fit. - Designed to work with Pedro's snap-channel Pro Socket Handle, a 24mm socket or wrench, or in a bench vise. Pedro's socket tools provide a professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly, protecting the component and ensuring simple and safe usage for the mechanic.