Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

NEW: Please refer to our chart for the correct adapter size you need. Disc brake adaptors available for Shimano, SRAM, Hope, Hayes, Formula, etc. rotors CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal for front and rear brakes. Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size. If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4, etc.), please also order a low profile (button head) bolt kit to ensure correct fitment. Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available. Not currently compatible with TRP 203mm rotors.
- Use without washers for two chainrings, with washers for one DH ring - Bolts and nuts use hex keys - Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers - Length: 8mm - Material: Steel - Type: Hex
Enduro 6806 ABEC-3 Sealed Bearing. Direct replacement bearing for most BB30/PF30 OEM bottom brackets as well as all Wheels Mfg bottom brackets for 30mm spindle cranks. - Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - ABEC-3 - Grade 10, 5/32" chromium steel balls - Kyodo Yushi SRL grease or equivalent - Enduro Part # BB 6806 LLB/C3 - Imported - Sold Bag of 2
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application - These hangers do not come with mounting hardware - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$0.79
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.00
Service parts for Fox suspension.
$1.00 - $48.00
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push
$1.30
Replacement piston and seals for Hope disc brake calipers.
$1.50
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$1.58
KS Dropper Post Service Parts
$1.58
Saddle clamp heads and lowers for KS Dropper posts.
$1.58
Saddle clamp heads and lowers for KS Dropper posts.
$1.59
- Model: Replacement bolt - Compatibility: Allen, M5x16
$1.79
Replacement bearing for the lower half of YST8003 #7 headset.
$1.79
Replace the top bearing in your YST8300 headset with these caged ball bearings.
$1.95
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$1.99
- Routes cables underneath the bottom bracket - Will not rust or corrode
$1.99
- 8x1mm Allen head
$2.00
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
$2.19
- Crown Race - Size: 27.0mm
$2.19
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
$2.19
- Type: Lock washer - Size: 1" Keyed
$2.39
- Aluminum w/lock nut and mount - Slotted mount design
$2.39
- Replacement cable anchor bolt for brakes - Includes nut and washer
$2.39
- w/Nut - 1-3/4-inch
$2.39
- Rubber - Color: Black
$2.42
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$2.50
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
$2.50
- Aluminum w/lock nut - 18mm long/6mm O.D.
$2.50
- For MTB levers - 7mm x 1mm - Aluminum construction
$2.52
KS Dropper Post Service Parts
$2.52
Saddle clamp heads and lowers for KS Dropper posts.
$2.79
- Includes everything needed to mount non-threaded brake pads to cantilever brake arms
$2.99
Air Spring Volume Reduction Kit - Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer
$2.99
- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction
$2.99
M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.
$3.00
- Aheadset preload adjusting bolt
$3.00
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring
$3.00
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$3.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC K710 and K710SL chains - No tools needed
$3.00
Replacement lower hardware for Rockshox forks.
Page 1 of 34 Next page