Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

29-Inch

Race Face Aeffect R 29-inch Front Wheel
$249.99
Give 'em your worst Aggressive with a downright surly attitude, the new Aeffect R wheelset was built to provide you with category-leading Trail to Enduro good times with a 30mm-wide, offset 6069 alloy rim and new Trace hub to make for an unstoppable combo of toughness and durability. Rough And Rowdy Made to handle all kinds of Enduro and all-mountain punishment, the burly Aeffect R rim sports a 30mm inner width and is born tubeless ready. Balance is Key Aeffect R sports a stout, 6069 alloy rim with a 4.5mm-offset spoke bed to provide spoke tension balance, increasing wheel stiffness and overall fatigue life. No Frills, All Thrills The new Trace hub doesn't need flash or gimmicks. Highlights include: durable cartridge bearings, no-nonsense 10-degree engagement, a tough steel axle, and all relevant cassette body options. This hub will get the job done, ride after ride.
Race Face Aeffect R 29-inch Rear Wheel
$349.99
Give 'em your worst Aggressive with a downright surly attitude, the new Aeffect R wheelset was built to provide you with category-leading Trail to Enduro good times with a 30mm-wide, offset 6069 alloy rim and new Trace hub to make for an unstoppable combo of toughness and durability. Rough And Rowdy Made to handle all kinds of Enduro and all-mountain punishment, the burly Aeffect R rim sports a 30mm inner width and is born tubeless ready. Balance is Key Aeffect R sports a stout, 6069 alloy rim with a 4.5mm-offset spoke bed to provide spoke tension balance, increasing wheel stiffness and overall fatigue life. No Frills, All Thrills The new Trace hub doesn't need flash or gimmicks. Highlights include: durable cartridge bearings, no-nonsense 10-degree engagement, a tough steel axle, and all relevant cassette body options. This hub will get the job done, ride after ride.
Race Face Aeffect R eMTB 29-inch Rear
$399.99
- 6069 rim material with 30mm internal width, delivers impressive rim durability and impact resistance - 4.5mm offset improves spoke (32h) tension balance, increasing wheel stiffness and strength - Trace hubs deliver eMTB rated strength for every rider with 10 degrees of engagement
Race Face Turbine 29-inch Front
$399.99
- Large oversized flange for improved bracing angle making a stiffer wheel - Larger bearings spaced wider apart for better stability and durability - 30mm internal width tubeless ready rim
Race Face Turbine 29-inch Rear
$499.99
- Large oversized flange for improved bracing angle making a stiffer wheel - Larger bearings spaced wider apart for better stability and durability - Six double tooth pawls give 120 points of engagement at a 3-degree rotation - 30mm internal width tubeless ready rim
Race Face Turbine 29-inch Rear Wheel
$499.99
Being a company of mountain bikers, when Race Face set out to design a new wheel, their goal was simple, "Make the wheel we want to ride." HUB - Large oversized flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Each pawl has its own spring - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos
Race Face Turbine R 29-inch Rear
$499.99
- Large oversized flange for improved bracing angle making a stiffer wheel - Larger bearings spaced wider apart for better stability and durability - Six double tooth pawls give 120 points of engagement at a 3-degree rotation - 30mm internal width tubeless ready rim
Race Face Next R 29-inch Front Wheel
$799.99
Race Face's first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life, and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 Year No Fault Guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
Race Face Next SL Front Wheel
$799.99
Race Face Next SL wheels are ready to maximize your trail riding; Super Light for XC but wide and strong for aggressive days on the mountain. Like their Next R wheels, Next SL have been designed to take full advantage of the benefits carbon fiber has to offer - durability, compliance, and weight savings in a 26mm width. The asymmetrical build onto the Vault Hub gives you a stronger, stiffer wheel construction, and tool-free end caps simplify your life. Get ready to take your ride to the Next level. HUB FEATURES - Large oversized flange for improved bracing angle and larger bearings - Wide bearing stance - One length spoke used throughout wheelset (F&R) - Tool-free interchangeable end caps (sold separately) - RIM FEATURES - Full carbon fiber construction - 26mm Internal width - Tubeless ready rim (tape and valves installed) - 45mm Offset improves spoke tension balance and wheel stiffness - High gloss black logos and interchangeable vinyl decals
Race Face Next R 29-inch Rear Wheel
$849.99
Race Face's first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life, and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 Year No Fault Guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
Race Face Next R 29-inch Rear Wheel
$849.99
- Full carbon fiber construction - 32mm Internal width - Tubeless ready rim (tape and valves installed) - 45mm Offset improves spoke tension balance and wheel stiffness - High gloss black logos and interchangeable vinyl decals - Single spoke length for entire wheel - Hub and bearing system designed and validated for longevity, smoothness, low drag, and zero play - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - One length spoke used throughout wheelset (F&R)
Race Face Next SL Rear Wheel
$849.99
Race Face Next SL wheels are ready to maximize your trail riding; Super Light for XC but wide and strong for aggressive days on the mountain. Like their Next R wheels, Next SL have been designed to take full advantage of the benefits carbon fiber has to offer - durability, compliance, and weight savings in a 26mm width. The asymmetrical build onto our Vault Hub gives you a stronger, stiffer wheel construction and the Vault’s Super Fast Engagement, long bearing life, and tool-free end caps simplify your life. Get ready to take your ride to the Next level. HUB FEATURES - Large oversized flange for improved bracing angle and larger bearings - Wide bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Individually sprung pawls - One length spoke used throughout wheelset (F&R) - Tool-free interchangeable end caps (sold separately) - Low drag labyrinth cassette body seal - RIM FEATURES - Full carbon fiber construction - 26mm Internal width - Tubeless ready rim (tape and valves installed) - 45mm Offset improves spoke tension balance and wheel stiffness - High gloss black logos and interchangeable vinyl decals
Roval Traverse 29 6B Wheelset
$650.00
Designed to handle everything from backcountry rock gardens to heavy days at the bike park, the Traverse is the definitive all-mountain wheel. A super-light, super-tough alloy rim is combined with refined and ultra-dependable hub and spoke technology for a wheel that can conquer any mountain. - Rim Type: Traverse Alloy, 29, Disc Brake, Tubeless Ready, Zero Bead Hook Design - Rim Details: 22mm Depth, 34mm External Width, 30mm Internal Width - Hub: Roval Step Flange Hub (SP19151/JFM02R) 6-Bolt, DT Swiss Ratchet LN 18t (20 deg), 110x15mm & 148x12mm thru-axle, SRAM XD Freebub, (Convertible freehub and endcaps) - Bearing Type: Sealed Steel Cartridge Bearing - Spokes: DT Swiss Competition Race J-Bend, Front: Two-Cross 28 count, L: DS 283mm, R: 283mm; Rear: Two-cross 28 count, L: DS 283mm NDS 283mm - Nipple: DT Swiss Hex Prolock Brass 2.0x14mm - Tire Size: 1.95" – 3.0"; Max Pressure: 40 psi - Weight: Wheelset 1,870g (including tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; to the last nipple turn - Extras: 19 and 31mm OD end cap options included, Roval tubeless tape and tubeless valve, Spare Spoke and Nipple Kit - System Weight Limit: 240lbs / 109kg
Roval Control 29 Carbon 6B XD Wheelset
$1,350.00
WHAT IT'S FOR, WHY IT'S GREAT From weekend hot laps to World Cup XC finals, the Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs. An unmatched level of durability, precision, and performance in this new Carbon Control wheelset that is purpose-built to open terrain, from gut-wrenching climbs to tear-inducing descents—a whole new era of riding. A high-performance wheel that excels everywhere from world cup xc races to your favorite weekend trail. The Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs and spokes. This level of quality, precision and performance has previously been found only on wheels costing twice as much. ASYMMETRY BEGETS SYMMETRY The asymmetric design of the Control rim offers some subtle but important benefits. With the spokes offset to one side of the rim, this allows us to reduce the spoke offset that usually occurs at the hub. In turn, this means we can generate greater bracing angles for the spokes between the hub and rim, while also minimizing the spoke tension differential that often occurs between drive- and non-drive side spokes. The end result is a wheel that is stronger, laterally stiffer, more durable, and in the case of the Control, allows us to utilize the same length spoke throughout the whole wheelset. MINIMUM WEIGHT, MAXIMUM DURABILITY, EASY SERVICEABILITY Striking a no-hassle balance between low weight and low maintenance, we chose DT Swiss 350 Classic hubs (15x110mm thru-axle front, 12x148mm thru-axle rear) as the basis for the Control Carbon wheels. With sealed bearings, a notoriously durable 36-tooth ratchet, and 28 spokes front and rear, dependability is assured. QUALITY THROUGHOUT, FROM HUB TO SPOKE TO NIPPLE TO RIM There is absolutely no point in laying up an awesome rim and pairing it with a quality hub, only to skimp on spokes and nipples. So, keeping strength and dependability foremost in our minds, we opted to hold the Control Carbon wheel together with the best: DT Swiss Competition Race spokes and alloy Pro Lock nipples.
Roval Traverse SL Fattie 29 148
$1,500.00
The Roval Traverse SL Fattie 29 148 wheels work to provide more traction, stability, and speed. The extra width also allows for more tire volume, which means increased suppleness in the ride quality. And not only this, but the ample width also better supports the tire, meaning that you'll experience less "burping" when riding tubeless. These wheels also include the Roval tubeless plug system, which is an easy and super lightweight solution for tubeless setups. At the front hub, you'll get a 15 x 110mm Boost thru-axle (end cap options included), and at the rear, 12 x 148mm Boost hub. The rear hub features DT Swiss internals for lightning-quick engagement. And to top everything off, these wheels are hand-built to ensure a painstaking attention to detail. Please note that this 148 version is exclusively designed for use with bikes designed with 110 x 15mm front axle and 148mm rear axle standards. - Rider Weight Limit: 240lb (108kg)
Roval Control SL 29 6B Wheelset
$2,500.00
Fastest XC Wheels In the Real World 1240 grams is an obscenely light weight when talking about mountain bike wheelsets, the kind of weight that XC racers dream about. But light weight alone is no longer enough. So, we engineered the new Control SL wheels to be sharp-handling, smooth-riding, extra-durable, and 22% less likely to pinch-flat your tires—in addition to being some of the lightest-weight production wheels on the planet. - Front Hub: Alloy body, SiNC Ceramic Bearings, 15 x 110mm thru-axle, 19 and 31mm OD end cap options included - Rear Hub: CNC-machined alloy body, SiNC Ceramic Bearings, premium-quality DT 180 internals and 54T quick engagement ratchet system cassette, includes SRAM XX1 11-speed freehub and 148 end caps - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook 4mm FlatTop design (Not compatible with tire inserts) - Rim Width: 29mm internal - Spokes: DT Swiss Aerolite Straightpull 294mm, 24-hole, Two-cross, Front & Rear - Nipple Type: DT Swiss Pro Lock Hexagonal Alloy 14 x 2.0mm - Max Rotor Size: 200mm - System Weight Limit: 275lbs / 125kg - Total Wheelset Weight: 1240g
Spank 350 J-Bend 29-inch Front
$319.99
Hand-built to A-Class specifications, the 350 wheels with SPANK Hex Drive hub is the premium lightweight performance offer from the SPANK wheelhouse and is trusted by pros on the Enduro World Series circuit. - Unique profile with low sectional height & wide width adds radial compliance & lateral stiffness - Improved radial compliance for better traction over bumps & chatter while reducing negative feedback to the rider gives enhanced performance & comfort - 30mm internal width is versatile, fitting tires from 2" to 2.6" and allows plus-size tire use without negative squaring off of tire profiles
Sta-Tru Speed Tuned 29er Rear
$145.99
29er Speed Tuned wheel assembled in the USA - STW Speed Tuned 29er shinning black anodized alloy double wall rims w/32 holes - Includes stainless steel eyelets and V-brake compatible sidewalls - Stainless steel black spokes for a solid all black appearance - Shimano Deore Disc Hubs
Sta-Tru STW/Speed Tuned 29er Front
$167.49
29er Speed Tuned wheel assembled in the USA - STW Speed Tuned 29er shinning black anodized alloy double-wall rims w/ 32 holes - Includes stainless steel eyelets and V-brake compatible sidewalls - Stainless steel black spokes for a solid all black appearance - Formula 6-bolt disc
Sta-Tru STW/Speed Tuned 29er Rear
$189.49
29er Speed Tuned wheel assembled in the USA - STW Speed Tuned 29er shinning black anodized alloy double-wall rims w/ 32 holes - Includes stainless steel eyelets and V-brake compatible sidewalls - Stainless steel black spokes for a solid all black appearance - Formula 6-bolt disc
Sta-Tru Sun Duroc 30 Disc/STW Turbo Front
$247.99 - $257.49
Sun Duroc 30 Disc blk 32h - -01: STW Turbo 6-Bolt disc - -02: STW Turbo Shimano 6-Bolt disc - -03: STW Turbo Boost 6-Bolt disc - -04: STW Turbo Boost Shimano 6-Bolt disc
Sta-Tru Sun Duroc 30 Disc/STW Turbo Rear
$316.49 - $319.49
Sun Duroc 30 Disc blk 32h - -01: STW Turbo 6-Bolt disc - -02: STW Turbo Shimano 6-Bolt disc - -03: STW Turbo Boost 6-Bolt disc - -04: STW Turbo Boost Shimano 6-Bolt disc
Stan's NoTubes Flow S1
$210.00 - $479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Flow S1 Wheelset - Use: Aggressive Trail, All Mountain, Enduro, and Downhill - Internal Rim Width: 29mm - Optimal Tires Size: 2.35 to 2.8-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (2,034g), and 29-inch (2,134g)
Stan's NoTubes Arch MK4 29-inch Front Wheel
$308.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed
Stan's NoTubes Crest MK4 29-inch Front Wheel
$308.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed
Stan's NoTubes Flow EX3 29-inch Front Wheel
$345.00
- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs
Stan's NoTubes Flow EX3 29-inch Rear Wheel
$475.00
- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall
Stan's NoTubes Arch MK4 29-inch Rear Wheel
$657.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed
Stan's NoTubes Crest MK4 29-inch Rear Wheel
$657.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed
Stan's NoTubes Flow MK4 29-inch Rear Wheel
$657.00
- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.