$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Replacement parts for JoeBlow Pro and JoeBlow Booster.
Topeak's Pocket Shock DXG lets you fine-tune air forks and shocks with ease thanks to its easy-to-read gauge. Its compact design easily fits in tool boxes, jersey pockets, hydration packs and seat bags. The durable aluminum barrel makes it easy to inflate shocks up to 300 psi. Other great features include a pressure-release button and rotating hose for those hard-to-access shock valves.
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.
Upgrade any pump to the TwinHead pump head.
- Mini road pump with intergrated gauge - Presta/Schrader compatible dual head - High pressure/High volume switch - Ergonomic T-handle - 120psi max
Specialized's Air Tool Blast Tubeless Tire Setter features a high-pressure tank that dumps a high volume of air into a road or mountain tubeless tires. This enables you to quickly and easily lock the beads into the rim for a proper seal. Now, setting-up tubeless tires at home can be done without a pricey air compressor. - Removes the necessity for an air compressor when installing tubeless tires. - Portable design blasts air into your tubeless tires for fast and easy set-up. - Works with road, mountain, and 6Fattie tubeless tires. - Inflate with a floor pump that has a pressure gauge, operating range of 100–140 PSI (7–9.5 BAR). - Safety valve protects canister from over inflation.
Thanks to its smaller-diameter barrel, with Specialized's Air Tool HP Floor Pump it's easier than ever to inflate high-pressure tires. It also features Specialized's SwitchHitter head that works with Presta and Schrader valves, quality steel construction for excellent durability, and a three-sided base for superb stability. Plus, you'll love the comfortable, wide handle, easy-to-read oversize gauge and the nice, long hose.
Specialized's Air Tool Comp Floor Pump boasts a pro-quality cast aluminum base, barrel, and ergonomic handle with rugged internals for easy pumping and excellent durability. Featuring Specialized's great SwitchHitter II head that automatically adapts to fit Presta and Schrader valves, this sturdy pump also sports an easy-to-read oversize gauge that makes finding the right pressures a breeze.
The Air Tool Road is a minimalistic frame pump that provides efficiency and reliability for high-pressure road tires. - All new, inverted double chamber design increases the air handling capacity by 25% compared to our previous design, reducing pumping time by up to two minutes. - Presta-only head keeps size and weight to a minimum while the dust cover keeps the insides clean. - Machined outer barrel for extra grip while pumping.. - All-aluminum inner and outer chamber for durable performance. - Water bottle boss mount included. - Max pressure: 100 PSI (6.9 bar) - Volume-per-stroke: 60cc
Tune your suspension to perfection wherever you are with Specialized's Air Tool Shock Pump. It's easy to get exact pressures with the dial gauge and the micro air bleed button. Plus, the compact design means it will easily fit in your hydration pack.
Specialized's Air Tool Sport Floor Pump boasts all-steel construction, durable internals, a long hose, a sturdy handle and a three-sided base for easy pumping and excellent stability. You also get Specialized's SwitchHitter head that automatically adapts to fit Presta and Schrader valves, and an easy-to-read, 2-inch gauge to make dialing in the right pressure a breeze.
Specialized's Air Tool UHP Floor Pump makes it easy to dial in your fork and shock. With a cast aluminum base and an aluminum barrel, this sturdy floor pump reaches 350psi with ease. What's more, the micro air bleeder makes it easy to set the perfect pressure.
$20.00 - $35.00
The MTN Tube Spool is a simple, compact system that'll carry everything you need to fix a flat without weighing you down. To do so, its design allows for a spare tube, with up to a 48mm valve stem, to be rolled-up without damaging the tube. Meanwhile, the Spool can easily hold a lever, CO2 cartridge, and a valve head. - Patent-pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber. - CO2 valve head and two-sided tire lever snap into place for compact and secure storage. - Holds a single threaded 25g CO2 cartridge. - Fits up to 48mm long tube valve stems. - Hook and loop strap can slide side to side to accomodate all different size mountain tubes
- Replaces well-used head and fittings and prolongs the life of your trusty floor pump - For 2010 floor pumps
$15.00 - $25.00
A simple, compact system to carry everything you need to fix a flat without weighing you down. - Patent pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber - CO2 valve head and 2-sided tire lever snap into place for compact and secure storage - Holds a single threaded 16g CO2 cartridge - Fits up to 80mm long tube valve stems
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
The Starter Kit has all of the basic necessities required to get you out riding prepared and safely. It contains two bottle cages, a durable, efficient pump, tire levers, and a water-resistant saddle bag to house it all. - Mini Wedgie saddle bag provides 48.5 cu. in. of easily accessible storage—ample room to house tire levers, small pumps, and basic nutrition. It's also treated to be water-resistant, and features an internal neoprene sleeve to safely hold tools. - Two Roll Cage bottle cages are light, dependable, and easy on the eyes, making them the perfect solution to your hydration needs. - Air Tool Flex Road pump is lightweight, durable, and features a twin Presta and Schrader valve on the T-Head. It's hose has built-in flex to alleviate stress on the tube's valve, while its inverted barrel design is efficient and allows for easy, high-volume pumping.
- Easy to read LED display plus a setting for low to high PSI, KPA & BAR - 45 degree head, reads to 150psi. 45g
Serfas does it again with the innovative 2-In-1 Shock/Tire pump. Throw it in your pack for every ride and you have a dual purpose pump that boasts a 300psi capacity. It uses a dual action motion to make it easy to pump in higher volumes or higher pressures. The aluminum construction makes it super durable. A large gauge is easy to read and the air-release button makes fine-tuning pressure in shocks and tires a breeze.
Serfas' AP-01 is perfect for riders who want to skip the hard work. This CO2 inflator fits 12-gram threadless and threaded cartridges as well as 16-gram threaded cartridges for the ultimate in versatility. The trigger mechanism lets you perfectly control the inflation. Plus, it includes a threadless 12-gram cartridge to get you started!
Serfas' FP-200 Floor Pump lets you fill your tires in no time. It has a grippy, sturdy base and a metal barrel for maximum inflation power. Its ergonomic handle and top-mounted gauge make pumping super easy. Plus, Serfas' easy-to-use Simple Valve head accepts all valve types and includes additional attachments to inflate balls.
Serfas' FP-200 Floor Pump lets you fill your tires in no time. It has a durable metal barrel for maximum inflation power. Its ergonomic handle and top-mounted gauge make pumping super easy. Plus, Serfas' easy-to-use Simple Valve head accepts all valve types and includes additional attachments to inflate balls. • Durable metal barrel and base and ergonomic handle • Easy to read top-mounted large gauge • Equipped with ball and accessory attachments • PSI capacity: 160 psi
The FP-200 digital gauge allows you to convert your Serfas floor pump to digital, or replace a worn out digital gauge. It's compatible with all FPD-200 and FP-200's, with the exception of WFP-200 and FP-200BK.
Serfas' FP-200MTBK Stealth Black Floor Pump lets you fill your tires in no time. It has a durable metal barrel, coated in a stylish matte black sheen, for maximum inflation power. Its ergonomic handle and top-mounted gauge make pumping super easy. Plus, Serfas' easy-to-use Simple Valve head accepts all valve types and includes additional attachments to inflate balls. • Durable metal barrel and base and ergonomic handle • Easy-to-read top-mounted large gauge • Equipped with ball and accessory attachments • PSI capacity: 160 PSI
Serfas' FP-55 Floor Pump is a great inflator. It sports a rugged aluminum barrel, a comfortable ergonomic handle, a sturdy nylon base, and an easy-to-read built-in gauge. Inflation is easy thanks to a valve head that fits Presta and Schrader valves. It stores additional inflation tools in the removable handle plugs so you can also inflate balls and other accessories.
$65.00 - $75.00
The FPD-200 has a large, top mounted easy-to-read digital gauge. The digital gauge is also backlit and ensures accuracy to 1%. The pump head is a simple valve for ease of use on both Presta & Schrader valves. The base has ribbed plastic inserts for grip when using the pump with cycling cleats. A ball and accessory attachment is included, making the pump versatile beyond your cycling needs. Features: - Large, easy-to-read backlit digital gauge - Durable metal barrel & base - Easy to grip ergonomic handle - Ribbed plastic inserts in base for good grip with cycling cleats - Handle lock - Equipped with ball & accessory attachments - Accurate to 1% +/- - Easy to change battery - 2" digital gauge (measured diagonally) Specs: - Capacity: 160 PSI - Weight: 1,658 grams - Height: 28 1/2"
Serfas’ High Pressure Mini Pump can inflate a tire up to 140 PSI, and the long barrel means fewer strokes to get your tire inflated. The Quick Draw head fits both Presta and Schrader valves. Plus, at 100 grams, you’ll hardly notice it’s there until you need it. • Quick draw head fits both Presta and Schrader valves • Aluminum body • Small size fits easily into jersey and small packs • Weight: 100 grams • PSI capacity: 140 psi
The Micro Blast is what you need for easy inflation on the road or trail. This easy to use CO2 inflator head will get you back on your way in a hurry. The simple spring push design makes it easy to inflate your Presta valved tube. - Fits All Threaded CO2 Cartridge Sizes - Alloy Mini Head With Threaded Spring Push Design - Small, Lightweight, Compact Design - Weight: 18 Grams w/o CO2s
Page 1 of 5 Next page