Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack. - Axle not included. Works with your bike's thru-axle - Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc. - Built-in safety tabs - Durable black powder-coat finish Product Specs: - Weight: 0.32 – 0.38 lbs. - Minimum Crossbar Spread 16in - Maximum Crossbar Spread 42in - Limited Lifetime Warranty
Yakima's HighLoader is a premium upright bike mount that accommodates nearly any bicycle, from sleek road bikes to 29ers with up to 3-inch-wide tires. It makes no contact with the bike frame itself, so it works great with disc brakes, full-suspension rigs and through-axles, and it's nice and easy to mount your bikes. It's also compatible with round or square crossbars, as well as factory and aerodynamic bars with Yakima's Mighty Mounts (sold separately). And it includes a dual-purpose, integrated cable lock that secures the bike to the rack, as well as the rack to the car so your stuff stays safe.
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.
These MightyMounts are simple attachments that make several gear-specific Yakima mounts compatible with Whispbar. - Simple snap-around adapter allows Yakima bike, boat and cargo accessories to be attached to Whispbar rack systems - Quick and easy installation and removal; no tools required - 32H fits onto Whispbar Flush, Through and RailBar rack systems - Allows the attachment of the following Yakima accessory mounts: HighRoller, Raptor, Mako Saddle, LandShark, KayakStacker, HullyRoller, HullRaiser, BasketCase and WheelFork - Sold as a set of 4 and uses the hardware provided with the accessory mount Product Specs: - Weight: 0.47 lbs. - Limited Lifetime Warranty
Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key
$59.95 - $74.95
Thule's Thru-Axle Adapter allows you to carry bikes with through-axle front forks on Thule and most other fork-mounted bike carriers.
Swagman's Cross-Country Rack transports 2 bikes safely and securely, so it's always quick and easy to bring your bikes along! Place your bike in the wheel holders, adjust the ratcheting arm, strap the wheels down, and go. The XTC rack is made of steel for excellent stability and durability, features adjustable wheel holders to fit different bike types, and folds down so you can access your vehicle.
Don’t let some jerk steal your bike! Since SeaSucker bike racks aren’t bolted on to rooftop bars, we came up with a way to keep your bike safe. A Cable Anchor is just what it sounds like – an anchor point to securely connect a cable loop to your car. The Cable Anchor – Window, slides over the glass and rolls up into the window frame. Each is made of polished stainless steel and has a wide 1.375-inch hole to thread a cable lock through. The Cable Anchor - Window, is not recommended for tinted windows.
$29.95 - $34.99
The HUSKE (HUb Standards Keep Evolving) is a universal fork mount that handles the most common fork mount standards of yesterday, today, and tomorrow. These interchangeable plugs fit into an anodized aluminum extrusion (sold separately). Suitable for all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon.
Our high-end Komodo rack (rest assured, though, it works with any of our fork-mount racks) demanded some way to carry the front wheel as well, and the Hogg seemingly popped into existence. Replace your rear wheel’s axle nut with the anodized aluminum Hogg nut and then you can screw on the Hogg body when you’re ready to transport your bike. Your front wheel’s quick-release skewer clamps onto the Hogg body and off you go! Comes with an anti-rotation strap to stop your wheel from spinning pointlessly when attached. For quick-release hubs only.
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.
What happens when you take the most popular trunk rack of all time and expand its vehicle compatibility by 20%? Spoiler Alert: you get the Bones EX. Cultivated in the mind of Italian designer Fabio Pedrini and brought to life in our Wisconsin-based facility, the Bones EX features a unique and game-changing leg. Featuring a leg that gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs, the Bones EX now fits 20% more vehicles than its legendary predecessor. And that’s not all. We’ve decked out the Bones EX with premium bike hold downs and a handy strap management system in a shade that never goes out of style. Product Features - Best fit around: fits 89% of the top vehicles sold, including those with spoilers. - VIP Treatment: premium bike hold downs that are easy to use and quick to load. - Clean, Sleek Look: integrated strap management eliminates flapping straps. - Strong & Rust-Free: injection-molded arms and legs keep the rack solid for years to come. - Carries 3 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.
Freedom is a versatile lightweight rack that makes loading and unloading bikes quick and easy. Foldable upright arms securely clamp top or seat tubes with soft, non-marring pads. - Ratcheting straps keep bike stable and secure and adjust to fit most bikes - Standard wheel scoop fits up to 2.25" tires. Fat wheel trays are available separately - Adjustable to work with most bikes - Fits 1 1/4- and 2-inch hitches - Can hold two bikes weighing up to 60 lbs each - Rack weighs 20 lbs - Made in the USA
$12.99 - $17.49
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).
The RockyMounts HotRod is a do-it-all truck mount for bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
Origin-8's Bike Block Fork Mount can be mounted to almost any flat surface and securely holds your bike by the fork. It's made of sturdy steel and works with quick release 9mm dropouts as well as 15mm and 20mm through axles!
We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.
$429.00 - $439.00
When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium gloss metallic powder with water transferred logos - Compatible with 2” NV 2.0 - Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each - Holds wheelbases up to 48” and tires as large as 4.8” - Quick change from 2 to 4 bikes
Expand your vehicle’s carry capacity (and your circle of friends) up to four bikes with the NV 2.0 Add-Ons. It's conceived for road trips, family group rides and expeditions in the backcountry—we took the best platform rack on the market and increased it. Integrated Cable Locks - Seamlessly integrated locks—long enough to fit any frame—make sure your bike stays off Craigslist while you enjoy that post-ride beer stop. And when you’re ready to roll again, they stow right back into the rack. Adjustable Tire Cradles - Bikes not wanting to share space nicely? Easily dial in the fit with adjustable tire scoops. You get three positions to choose from, so handlebar and seat post clearance is never an issue. - Intuitive Front Tire Ratchet - Trail-Doc Compatible - Premium Protective Gloss or Matte Powdercoat
When your solo ride turns into a weekend expedition with friends, the NV Base 2.0 Add-On lets you increase the NV Base 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium matte powder coat - Compatible with 2-inch NV Base 2.0 - Increases 2-inch NV 2.0 carrying capacity to 4 bicycles weighing up to 40 pounds each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Quick change from 2 to 4 bikes
Expand your vehicle’s carry capacity (and your circle of friends) up to four bikes with the NV 2.0 Add-Ons. It's conceived for road trips, family group rides, and expeditions in the backcountry—we took the best platform rack on the market and increased it. Integrated Cable Locks - Seamlessly integrated locks—long enough to fit any frame—make sure your bike stays off Craigslist while you enjoy that post-ride beer stop. And when you’re ready to roll again, they stow right back into the rack. Adjustable Tire Cradles - Bikes not wanting to share space nicely? Easily dial in the fit with adjustable tire scoops. You get three positions to choose from, so handlebar and seat post clearance is never an issue. - Intuitive Front Tire Ratchet - Trail-Doc Compatible - Premium Matte Black Powdercoat
Kuat's NV 2.0 Base is loaded with features that make it one of the most equipped platform racks on the planet. This darkened brute features Kuat's foot lever pivot release, adjustable cradles for increased bike fit, integrated cable locks, a hand-tight cam system, and a ballistic black powder coat that will stand up to years of abuse. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks and hitch lock included - Front tire ratchet with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium matte powder coat - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV Add-On 2.0 Base
RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate
The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between rack and vehicle - No-tool install with hand tight hitch cam system - Gloss metallic powder available in 3 colors - Low profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47-inch and tires as large as 3-inch - Increased spacing between bikes to 14-inch - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes
Imagine for a moment if you can…for the same cash you spent on that overhyped, overly complex hanging style rack, you could get your hands on the Küat Transfer. This budget-friendly beast boasts stout steel construction that won’t leave you hanging. The one-bike add-on is compatible with Kuat's Transfer 1.
$35.00 - $49.00
Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.
A fork hitch for bike transportation that allows for versatile mounting options on any flat surface. - Pre-aligned positioning for easier fork installation - Remove Boost 15 x 110mm insert to accommodate 20mm axles - Easy mounting to any flat surface - Rust-free Aluminum construction - The platform is 3.75 x 1.5" and the holes are 3" center to center Compatible with following: - 15 x 110 mm (Boost, silver insert) - 15 x 135 mm (Borealis, Fatback, 9zero7 + other Fat Bike forks) - 15 x 142 mm (Salsa + others) - 15 x 150 mm (Rock Shox Bluto Fork + others) - 20 x 110 mm
Page 1 of 13 Next page