12- to 24-Inch

- Urban tire with a durable thick rubber casing - Smooth thick center tread with deep siping for all-weather traction and low rolling resistance - ISO: 507 - Bead: Wire

Sunlite's Street S-7 Tire is an urban tire with a raised center rib for reduced rolling resistance. - Size: 16 x 1-3/4 S-7 - ISO: 317mmm - Bead: Wire - Max PSI: 50 - Weight: 438g * Not interchangeable with tires labeled "16 x 1.75"

Classic knobby BMX tread now available in multiple colors with skin sidewalls. - Wire bead - 30 TPI

- Street/park tire with near rim-to-rim tread, tacky surface, medium grooved - Wire bead - Size: 12 1/2 x 2 1/4

- Park/street tire, with directionally grooved tacky tread - Wire bead - Available in three widths

- Entry-level BMX/MTB tire with deep knob pattern for traction - Wire bead - 16 x 2.125

- Entry-level BMX-style tire with sturdy casing for longevity

- Entry-level BMX/MTB tire with deep knob pattern for traction - Wire bead - 20 x 2.125

- Recreational tire with raised center, slight lateral grooves for traction - Size: 24 x 1 3/8

- Gray tread, sidewalls with raised center - 8 x 1 1/4

- Smooth rolling center and micro tread shoulders - Directional water evacuating lines keep you upright - ISO: 507 - Bead: Wire - Weight: 771g

- Urban tire with raised center for reduced rolling resistance - Size: 20 x 1 3/4 - ISO 419

The Sunlite Revolotions is a street/cruiser tire with an all-around tread style. - Wire bead - TPI: 26

Sunlite's Street S-7 Tire is an urban tire with a raised center rib for reduced rolling resistance. - Size: 20 x 1-3/4 S-7 - ISO: 419 - Bead: Wire - PSI: 50 - Weight: 470g * not interchangeable with tires labeled "20 x 1.75"

A highly versatile front and rear race tire option that strikes a balance between speed and control with Tioga's GripPod technology and Nano Knob tread design - CYLEX 120 TPI ultralight casing - PneuMax 110 PSI high-pressure inner coating - AvntGUARD cut protection membrane - UTC rubber compound - Grip-Pod system helps maintain traction when cornering - Chemical etching on center tread creates a fine texture for enhanced traction

With the increased strategical placement of Grip-Pods matched to multi-facet Nano Knobs on shoulder and sides, capped off with friction-enhancing chemical etching over the central tread, FASTR-X strikes the rarefied balance of speed and control like none before. - CYLEX 120 TPI ultralight casing - UTC rubber compound - Grip-Pod system helps maintain traction when cornering - Chemical etching on center tread creates a fine texture for enhanced traction - Multi-facet nano knobs provide additional traction on tire shoulders - ISO diameter: 451mm

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

The Ground Control tire is such a great trail tire, we have adapted it for all sizes and ages. This tried-and-true design features CAD-engineered knob shapes, which strengthen the knob structure for optimal braking and traction, but it keeps the knob surfaces adaptable for the best possible grip on mountain trails. - Casing: 26 TPI - Bead: Wire - Compound: 60a - 20x2.35", 25~50 - 24x2.35", 25~50

Sharing same state-of-the-art features as the FASTR, the FASTR REACT adds distinctive rows of paddle-like serrated shoulder treads designed to better “lockdown” the tire during hard acceleration to more efficiently transfer the power of each pedal stroke into forward momentum. React faster out of the gate with the FASTR REACT. - CYLEX 120 TPI Ultralight casing - UTC Rubber Compound - Folding Bead

IRC produces a 125psi high pressure casing and wraps it with a factory-siped slick. Additional surface area is applied to the crown through the innovative use of reinforcement gussets at the edges.

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

Kenda K-Rad - Checkerboard-shaped knob design - Knurled tread surface for traction and control - Ribbing between knobs strengthens the casing - Kenda endorses the use of fluid based sealants only in specifically designated Kenda sealant compatible tire

The Mirage tire is built on the premise of a super-lightweight tire that was strong enough for the toughest street riders. The Mirage uses a high-performance 120tpi casing and a specially designed dual-compound tread that is smooth in the center, but with plenty of grip on the outer tread for traction and control while cornering and carving. The Mirage was also designed with street riders in mind and uses a full bead-to-bead "Silkshield" protection layer and a special outer ridge which acts like a bumper and prevents the sidewall getting damaged during grinds. - High-performance lightweight street tire - Dual-compound construction - Full-length "Silkshield" layer under tread and sidewalls for added protection - Specially designed tire tread with a smooth center tread for low rolling resistance and aggressive sides for traction and grip - Special outer line for grind protection - Made by Maxxis tires

Rubber has always been a serious topic of discussion at WeThePeople. Not only is it the connecting point between your bike and what you’re riding, it also makes a huge difference as to how your bike feels. After the success of the Grippin' and Feelin' tires, WTP wanted a fresh new design based on the needs of the modern street rider. After a long process of testing compounds and refining the tread design, they came up with something quite special. The Stickin’ tire is the successful end result of over a year of hard work. It uses a specially designed shape and specific rubber compound that allows it to stick to nearly anything, yet enable you to grind endlessly without getting your tire stuck on the side of the rail or ledge. This 'street slick' beast was designed to grind and slide like nothing else.

Dirt-to-pavement versatility - BMX, urban assault, or dirt jump - Inverted knob design The Holy Roller is one of those "set-it-and-forget-it" tires. Mount up a pair of Holy Rollers on your BMX or DJ bike and you'll be ready for the next session no matter where it's happening—dirt, street, or park.

Drop. The. Hammer. - Grooved slick tread design - Lightweight casing While originally designed as a BMX race tire, the DTH has found success beyond the track, including street riding, pump track, skate park, and slopestyle. The grooved slick maximizes rolling speed by minimizing drag.

Park/street tire, with directionally grooved tacky tread. - ISO: 355 - Bead: Wire

Light up the track or street with the Torch! - Grooved slick center tread - Lightweight construction - Textured cornering knobs Originally designed as a race tire for modern BMX tracks, the Torch brings the heat to your competition.

The Jake Seeley signature Street Sweeper tire features a directional, dual compound construction. - Center tread features softer durometer - Side tread features a harder durometer to withstand grinds